Ãëàâíàÿ    Ex Libris    Êíèãè    Æóðíàëû    Ñòàòüè    Ñåðèè    Êàòàëîã    Wanted    Çàãðóçêà    ÕóäËèò    Ñïðàâêà    Ïîèñê ïî èíäåêñàì    Ïîèñê    Ôîðóì   
blank
Àâòîðèçàöèÿ

       
blank
Ïîèñê ïî óêàçàòåëÿì

blank
blank
blank
Êðàñîòà
blank
Mobley R.K. — Plant Engineering Handbook
Mobley R.K. — Plant Engineering Handbook



Îáñóäèòå êíèãó íà íàó÷íîì ôîðóìå



Íàøëè îïå÷àòêó?
Âûäåëèòå åå ìûøêîé è íàæìèòå Ctrl+Enter


Íàçâàíèå: Plant Engineering Handbook

Àâòîð: Mobley R.K.

Àííîòàöèÿ:

Every plant engineer's bookshelf should contain at least one basic engineering reference. And if you're only going to have one, Plant Engineer's Handbook is a good candidate. This volume is a completely revised edition of Plant Engineer's Reference Book, which was published about 10 years ago.

As chief editor of the handbook, Keith Mobley has done a masterful job of assembling the contributions of 40 contributors into 64 chapters that cover the entire plant engineering function from definition to technology to management. In fact, this handbook stands out from most other engineering handbooks by including information on such issues as insurance, finances, and maintenance management in addition to the engineering knowledge plant engineers require. - Plant Engineering Magazine

This book covers the things a plant engineer does-such as selection of a suitable site for a factory and provision of basic facilities - as well as issues such as labrication, corrosion, energy conservation, maintenance and materials handling environment, insurance and finances. The volume provides a comprehensive treatment of the maintenance management funuction. In addition to chapters outlining the operation of plant equipment, there is advice on getting the most out of the equipment and its operators. -llE Solutions


ßçûê: en

Ðóáðèêà: Òåõíîëîãèÿ/

Ñòàòóñ ïðåäìåòíîãî óêàçàòåëÿ: Ãîòîâ óêàçàòåëü ñ íîìåðàìè ñòðàíèö

ed2k: ed2k stats

Èçäàíèå: 1st edition

Ãîä èçäàíèÿ: 2001

Êîëè÷åñòâî ñòðàíèö: 2000

Äîáàâëåíà â êàòàëîã: 21.05.2008

Îïåðàöèè: Ïîëîæèòü íà ïîëêó | Ñêîïèðîâàòü ññûëêó äëÿ ôîðóìà | Ñêîïèðîâàòü ID
blank
Ïðåäìåòíûé óêàçàòåëü
Temperature transducers, pyrometers      268—269
Temperature transducers, resistance thermometers      269
Temperature transducers, thermisters      268
Temperature transducers, thermocouples      268
Temperature, SI/non-SI conversion factors      319
The Associated Offices Technical Committee (AOTC)      173
The Associated Offices Technical Committee (AOTC), member companies      167
The Engineering Council (EC), address      11
The Engineering Council (EC), registration with      10—11
The Institution of Civil Engineers      9
The Institution of Electrical Engineers      9
The Institution of Mechanical Engineers      9
The Institution of Mechanical Engineers, address of      11
The Institution of Plant Engineers (IPlantE), aims of      9
The Institution of Plant Engineers (IPlantE), courses for qualifying for      10
The Institution of Plant Engineers (IPlantE), history of      9
The Institution of Plant Engineers (IPlantE), membership requirements      10
The Institution of Plant Engineers (IPlantE), organizational structure      10
The International Protection (IP) Code, (luminaires)      123—124
theft      see “Security”
thermal conductivity      140—141
Thermal conductivity, SI/non-SI conversion factors      319
Thermal insulation      see “Insulation materials thermal”
Thermal plant electricity generation, applications      204 215—216
Thermal plant electricity generation, condensing steam cycle      204—205
Thermal plant electricity generation, fuels      205
Thermal plant electricity generation, performance influences      205
Thermal plant electricity generation, Rankin Cycle      204 (see also “Electricity power generation” “Electricity “Steam “Thermal
Thermal resistivity, SI/non-SI conversion factors      319
Thermisters      268
Thermocouples      268
Thermodynamics, laws of, and compressors      604—606
Thermography      872—873
Thermography, infrared imaging      872—873
Thermography, infrared thermometers      872
Thermography, line scanners      872
Third party liability and insurance      194—195 198
Threshold limit values (TLV), short-term exposure limit (TLV-STEL)      57
Threshold limit values (TLV), time-weighted average (TLV-TWA)      57
Time domain vibration plots/curves      724—727 742—744 760
Time to failure (TTF)      1121
Tinplate (tin-plated steel), corrosion      966
Titanium, limitations from corrosion      979—980
Toilet accommodation in buildings      60
Tools, employee safety and employer’s liability      196—197
Tort, and liability insurance      193 194
Total acid number (TAN), lubricating oil      874
Total base number (TBN), lubricating oil      874
Total dissolved solids (TDS), in cooling tower water      576
Total heat      483
Total suspended solids (TSS), in cooling tower water      576
transducer locations with      784—785
transducers      267—270
Transducers for computer monitoring equipment      780—787
Transducers, force      269—270
Transducers, temperature      267—269
Transformers      239—242
Transformers, air-cooled      239
Transformers, fittings      240—242
Transformers, oil cooled, mineral oil      239
Transformers, oil cooled, oil performance standards      951
Transformers, oil cooled, oil properties      951
Transformers, oil cooled, oil testing      951
Transformers, oil cooled, silicon-based liquid      239
Transformers, oil cooled, sludge observations      951
Transformers, temperature rise      240
Transformers, testing      240
Transformers, types, AN (air-natural cooling)      240
Transformers, types, OFAF (oil-immersed air-forced cooled)      239
Transformers, types, OFAN (oil-immersed air-natural circulation)      239
Transformers, types, ONAF (oil-immersed air-forced)      239
Transformers, types, ONAN (oil-immersed air-cooled)      239
Transformers, vector groupings and connection arrangements      241
Transport access, and site selection      20—21
Trap and object detection devices, security      50
Trend of vibration analysis      787—793
Trend of vibration analysis, broadband      787 788
Trend of vibration analysis, comparison to reference values      789—791
Trend of vibration analysis, composite      788 789
Trend of vibration analysis, evaluation methods      788—793
Trend of vibration analysis, narrowband      787—788 789
Turbines      see “Combined heat and power electricity generation (CHP)” “Electricity “Gas “Steam “Vibration
Turnkey building procurement      47
UK, health and safety in      1131—1149
Ullage, in oil storage tanks      277
Ultrasonic leak detection for predictive maintenance      876—877
Ultrasonic wall thickness/corrosion monitoring      984
Un-interruptible power supply systems      see “UPS”
UPS (un-interruptible power supply) systems, applications      250
UPS (un-interruptible power supply) systems, principle types      250
US, regulatory compliance in      1151—1156
Useful life concepts      1119—1121
User tolerance      1119
V-belts      765—766 1045—1058
V-belts, belt noise      1051—1053
V-belts, belt noise, squeaks      1052
V-belts, belt noise, squeals      1052
V-belts, belt/pulley selection      1045—1048
V-belts, computer vibration analysis      765—766
V-belts, computer vibration analysis, fault frequencies      765
V-belts, computer vibration analysis, running speeds      765—766
V-belts, contamination      1052
V-belts, cracking      1052
V-belts, cross section requirements      1046
V-belts, datum length      1046
V-belts, datum length, standard datum length chart      1047
V-belts, dust      1052
V-belts, effective length      1046
V-belts, excessive whip      1053
V-belts, extreme heat      1052
V-belts, failure reason examples      1054—1058
V-belts, inspection and replacement      1048
V-belts, installation      1048—1051
V-belts, installation, good practices      1048—1049
V-belts, length measurements      1046
V-belts, matching sets, need for      1046
V-belts, National Electrical Manufacturers Association (NEMA) standard      1047
V-belts, outside circumference measurements      1046
V-belts, power transmission/tension calculations      1045
V-belts, pulley center distance allowances      1050
V-belts, pulleys for      1047
V-belts, pulleys for, inspection and replacement      1048
V-belts, stretching      1052—1053
V-belts, tension inspection/adjustment      1049—1051
V-belts, tensions, working/bending/centrifugal      1045
Value added tax      1114
Valves      see under “The applications for use”
Vapor compressors/compressor systems      see “Compressed air systems” “Compressor
Vapor phase inhibitors, corrosion inhibitors      983
Vats and tanks, steam traps for      374
Vegetation, and air pollution      815
Vehicle access      see “Road access”
Ventilation of buildings      465—480
Ventilation of buildings, air for fuel-burning devices      58
Ventilation of buildings, commissioning and testing      478—479
Ventilation of buildings, condensation prevention with dehumidification      477
Ventilation of buildings, condensation prevention with insulation      476—477
Ventilation of buildings, condensation prevention with moisture reduction      477
Ventilation of buildings, condensation prevention with ventilation      477
Ventilation of buildings, contaminant local extraction      477 478
Ventilation of buildings, costs of running      479—480
Ventilation of buildings, definitions      467
Ventilation of buildings, fire control/smoke clearance      58
Ventilation of buildings, fresh air requirements      57—58
Ventilation of buildings, fume dilution, factories and warehouses      476
Ventilation of buildings, fume dilution, offices and public spaces      476
Ventilation of buildings, heat dissipation/cooling      58
Ventilation of buildings, humidity control      58
Ventilation of buildings, maintenance      479
Ventilation of buildings, natural ventilation      467—469
Ventilation of buildings, natural ventilation, advantages/disadvantages      468
Ventilation of buildings, natural ventilation, applications      468—469
Ventilation of buildings, natural ventilation, automatic control      469
Ventilation of buildings, natural ventilation, commissioning and testing      479
Ventilation of buildings, natural ventilation, controllable ventilation      473—475
Ventilation of buildings, natural ventilation, fixed ventilation      473
Ventilation of buildings, natural ventilation, flow rate calculations      468
Ventilation of buildings, natural ventilation, maintenance      479
Ventilation of buildings, natural ventilation, manual control      469
Ventilation of buildings, natural ventilation, roof ventilators      474
Ventilation of buildings, natural ventilation, wind effects      468
Ventilation of buildings, overheating, factories and warehouses      475
Ventilation of buildings, overheating, offices and public spaces      475—476
Ventilation of buildings, powered (mechanical) ventilation      469—470 470—473
Ventilation of buildings, powered (mechanical) ventilation, activated carbon filters      473
Ventilation of buildings, powered (mechanical) ventilation, advantages/disadvantages      470
Ventilation of buildings, powered (mechanical) ventilation, air cleaners      472—473
Ventilation of buildings, powered (mechanical) ventilation, axial fans      470
Ventilation of buildings, powered (mechanical) ventilation, centrifugal fans      470
Ventilation of buildings, powered (mechanical) ventilation, commissioning and testing      479
Ventilation of buildings, powered (mechanical) ventilation, control methods      470
Ventilation of buildings, powered (mechanical) ventilation, cross flow fans      471
Ventilation of buildings, powered (mechanical) ventilation, cyclones      473
Ventilation of buildings, powered (mechanical) ventilation, ducted systems      471
Ventilation of buildings, powered (mechanical) ventilation, electrostatic precipitators      472—473
Ventilation of buildings, powered (mechanical) ventilation, fan air movement calculations      469—470
Ventilation of buildings, powered (mechanical) ventilation, local extract systems      471—472
Ventilation of buildings, powered (mechanical) ventilation, maintenance      479
Ventilation of buildings, powered (mechanical) ventilation, mixed flow fans      471
Ventilation of buildings, powered (mechanical) ventilation, propeller fans      470
Ventilation of buildings, powered (mechanical) ventilation, roof extract units      471
Ventilation of buildings, powered (mechanical) ventilation, roof inlet units      471
Ventilation of buildings, powered (mechanical) ventilation, viscous, dry and HEPA air filters      472
Ventilation of buildings, smoke ventilation, as part of fire damage limitation      477—478
Ventilation of buildings, threshold limit values (TLV) (contaminants)      57—58
Ventilation of buildings, usage      56—57 (see also “Air conditioning”)
Vibration computer-based analysis applications, advantages      759
Vibration computer-based analysis applications, bearings      764—765
Vibration computer-based analysis applications, bearings, rolling element      803—804
Vibration computer-based analysis applications, bearings, sleeve (babbitt)      804—805
Vibration computer-based analysis applications, blowers, transducer locations with      784
Vibration computer-based analysis applications, chains      763 805
Vibration computer-based analysis applications, chains, running speed      763
Vibration computer-based analysis applications, compressors, bearings      769
Vibration computer-based analysis applications, compressors, bullgear      766—767 781—782
Vibration computer-based analysis applications, compressors, centrifugal      766—767 781
Vibration computer-based analysis applications, compressors, crankshaft frequencies      767—768
Vibration computer-based analysis applications, compressors, frequency shift due to pistons      768
Vibration computer-based analysis applications, compressors, gear mesh      769—770
Vibration computer-based analysis applications, compressors, piston orientations      768—769 782—783
Vibration computer-based analysis applications, compressors, positive displacement      767—770
Vibration computer-based analysis applications, compressors, reciprocating      767 782—783
Vibration computer-based analysis applications, compressors, rotor passing      770
Vibration computer-based analysis applications, compressors, running speeds      770
Vibration computer-based analysis applications, compressors, screw compressors      769—770 782—783
Vibration computer-based analysis applications, compressors, transducer locations on      781—783
Vibration computer-based analysis applications, couplings      763
Vibration computer-based analysis applications, couplings, flexible      763
Vibration computer-based analysis applications, couplings, gear couplings      763
Vibration computer-based analysis applications, couplings, jackshafts      763—764
Vibration computer-based analysis applications, couplings, universal joints      764
Vibration computer-based analysis applications, electric generators      771—772
Vibration computer-based analysis applications, electric generators, bearings      771
Vibration computer-based analysis applications, electric generators, casings      771
Vibration computer-based analysis applications, electric generators, line frequency      771
Vibration computer-based analysis applications, electric generators, shafts      771
Vibration computer-based analysis applications, electric motors      761—762
Vibration computer-based analysis applications, electric motors, bearing frequency      761
Vibration computer-based analysis applications, electric motors, imbalance      761—762
Vibration computer-based analysis applications, electric motors, line frequency      762
Vibration computer-based analysis applications, electric motors, loose rotor bars      762
Vibration computer-based analysis applications, electric motors, running speed      762
Vibration computer-based analysis applications, electric motors, slip frequency      762
Vibration computer-based analysis applications, electric motors, transducer locations with      783
Vibration computer-based analysis applications, electric motors, v-belt intermediate drive      762
Vibration computer-based analysis applications, fans      770—771
Vibration computer-based analysis applications, fans, aerodynamic instability      770—771
Vibration computer-based analysis applications, fans, running speeds      771
Vibration computer-based analysis applications, fans, shaft deflection      771
Vibration computer-based analysis applications, fans, transducer locations with      784
Vibration computer-based analysis applications, Fast Fourier Transforms (FFT)      760 761
Vibration computer-based analysis applications, gearboxes      764
Vibration computer-based analysis applications, gearboxes, bearings      764
Vibration computer-based analysis applications, gearboxes, gear-mesh frequencies      764
Vibration computer-based analysis applications, gearboxes, running speeds      764
Vibration computer-based analysis applications, gearboxes, transducer locations with      784
Vibration computer-based analysis applications, gears      805—810
Vibration computer-based analysis applications, intermediate drives      763—766
Vibration computer-based analysis applications, jackshafts and spindles      810—811
Vibration computer-based analysis applications, machine-train monitoring parameters      761—766
Vibration computer-based analysis applications, process rolls      771—772
Vibration computer-based analysis applications, process rolls, bearings      772
Vibration computer-based analysis applications, process rolls, load distribution      772
Vibration computer-based analysis applications, process rolls, misalignment      772
Vibration computer-based analysis applications, process rolls, transducer locations with      784
Vibration computer-based analysis applications, pumps      772—773
Vibration computer-based analysis applications, pumps, axial thrusting      772
Vibration computer-based analysis applications, pumps, centrifugal      772—773
Vibration computer-based analysis applications, pumps, hydraulic instability (vane pass)      772—773
Vibration computer-based analysis applications, pumps, passing frequencies      773
Vibration computer-based analysis applications, pumps, positive displacement      773
Vibration computer-based analysis applications, pumps, running speed      773
Vibration computer-based analysis applications, pumps, transducer locations with      784—787
Vibration computer-based analysis applications, single-channel data limitations      759
Vibration computer-based analysis applications, sprockets      805
Vibration computer-based analysis applications, steady-state data limitations      759—760
Vibration computer-based analysis applications, steam turbines      762—763
Vibration computer-based analysis applications, steam turbines, bearings      762
Vibration computer-based analysis applications, steam turbines, blade pass      762
Vibration computer-based analysis applications, steam turbines, mode shape (shaft deflection)      762
Vibration computer-based analysis applications, steam turbines, speed      762
Vibration computer-based analysis applications, time-domain data      760
Vibration computer-based analysis applications, time-domain data, v-belts      765—766
Vibration computer-based analysis applications, time-domain data, v-belts, fault frequencies      765
Vibration computer-based analysis applications, time-domain data, v-belts, running speeds      765—766 (see also “Failure mode analysis by vibration examination”)
Vibration computer-based analysis methods and operation, American Petroleum Institute (API) charts      791
Vibration computer-based analysis methods and operation, cross-machine comparison      793
Vibration computer-based analysis methods and operation, data acquisition      780—787
Vibration computer-based analysis methods and operation, data normalization      793
Vibration computer-based analysis methods and operation, database development      773—780
Vibration computer-based analysis methods and operation, database setup      774—780
Vibration computer-based analysis methods and operation, database setup, alert/alarm limits      778
Vibration computer-based analysis methods and operation, database setup, analysis parameter sets      775
Vibration computer-based analysis methods and operation, database setup, analysis type      775
Vibration computer-based analysis methods and operation, database setup, anti-aliasing filters      777
Vibration computer-based analysis methods and operation, database setup, averaging      777
Vibration computer-based analysis methods and operation, database setup, bandwidth      775
Vibration computer-based analysis methods and operation, database setup, boundary conditions and resolution      775
Vibration computer-based analysis methods and operation, database setup, constant speed machinery      776—777
Vibration computer-based analysis methods and operation, database setup, data filters      775
Vibration computer-based analysis methods and operation, database setup, data-acquisition routes      780
Vibration computer-based analysis methods and operation, database setup, gear mesh      776
Vibration computer-based analysis methods and operation, database setup, hanning correction      778
Vibration computer-based analysis methods and operation, database setup, load effects on limit      778—779
Vibration computer-based analysis methods and operation, database setup, maximum frequency      775
Vibration computer-based analysis methods and operation, database setup, minimum frequency      776
Vibration computer-based analysis methods and operation, database setup, mounting configuration      779—780
Vibration computer-based analysis methods and operation, database setup, narrowbands analysis      776
Vibration computer-based analysis methods and operation, database setup, operating envelope      779—780
Vibration computer-based analysis methods and operation, database setup, resolution      776
Vibration computer-based analysis methods and operation, database setup, roller-element bearings      776
Vibration computer-based analysis methods and operation, database setup, running-speed harmonics      776
Vibration computer-based analysis methods and operation, database setup, speed effects on limit      778
Vibration computer-based analysis methods and operation, database setup, variable speed, order analysis      775
Vibration computer-based analysis methods and operation, database setup, variable-speed machinery      777
Vibration computer-based analysis methods and operation, database setup, weighting      778
Vibration computer-based analysis methods and operation, database setup, window selection      778
Vibration computer-based analysis methods and operation, frequency-domain data      760
Vibration computer-based analysis methods and operation, industrial standards      790—791
Vibration computer-based analysis methods and operation, limitations      759—761
1 2 3 4 5 6 7 8 9 10 11 12 13 14
blank
Ðåêëàìà
blank
blank
HR
@Mail.ru
       © Ýëåêòðîííàÿ áèáëèîòåêà ïîïå÷èòåëüñêîãî ñîâåòà ìåõìàòà ÌÃÓ, 2004-2024
Ýëåêòðîííàÿ áèáëèîòåêà ìåõìàòà ÌÃÓ | Valid HTML 4.01! | Valid CSS! Î ïðîåêòå